How to Download and Install the Broadcom USH Driver for Windows 10 on Dell E6410
If you have a Dell E6410 laptop and you are looking for a way to install the Broadcom USH driver for Windows 10, you are in the right place. The Broadcom USH driver is a security device driver that enables the fingerprint reader and other security features on your laptop. Without this driver, you may encounter issues such as device manager showing an unknown device or a yellow exclamation mark next to the Broadcom USH device.
In this article, we will show you how to download and install the Broadcom USH driver for Windows 10 on your Dell E6410 laptop. Follow these steps:
Go to https://www.dell.com/support/kbdoc/en-ca/000181127/download-the-broadcom-ush-drivers, which is the official Dell support page for downloading the Broadcom USH drivers.
Using the drop-down menu under Category, select Security. When available, the Broadcom USH w/swipe sensor drivers are in the Dell ControlVault Driver, Dell ControlVault2 Driver and Firmware, or Dell ControlVault3 Driver and Firmware files.
Touch or click Download to the right on the driver listing. Note: When a firmware is also offered, you must download and install both the firmware and driver.
Save the file to your desktop or any convenient location on your computer.
Double-click on the downloaded file and follow the on-screen instructions to install the driver.
Restart your computer when prompted.
After installing the driver, you should be able to use the fingerprint reader and other security features on your Dell E6410 laptop. You can also check the device manager to see if the Broadcom USH device is recognized and working properly.
We hope this article was helpful for you. If you have any questions or issues, please contact Dell support for further assistance.Here are some additional tips for using the Broadcom USH driver on your Dell E6410 laptop:
To enroll your fingerprint, you need to use the Dell Data Protection Security Tools software. You can download it from https://www.dell.com/support/home/en-ca/drivers/driversdetailsdriverid=3k9g1&oscode=wt64a&productcode=latitude-e6410.
To enable or disable the fingerprint reader, you can use the BIOS settings. To access the BIOS, press F2 during the boot process. Then go to Security > TPM Security > TPM Activation and select Enabled or Disabled.
To troubleshoot any problems with the Broadcom USH driver, you can use the Dell Diagnostic Tool. You can download it from https://www.dell.com/support/home/en-ca/drivers/driverdetailsdriverid=8jx1k&oscode=wt64a&productcode=latitude-e6410.
We hope this article was helpful for you. If you have any questions or issues, please contact Dell support for further assistance. aa16f39245